SPDSI13 ABB Digital input module High densityhigh reliability compatibility multiple control systems
Product Overview
The ABB SPDSI13 is a high-performance 16-channel digital input module specifically designed for the ABB Freelance DCS system and is an important component of the S800 I/O series. This module supports dry contact and wet node signal input and is widely used in industrial automation scenarios such as power, chemical, water treatment, metallurgy and manufacturing where system stability and response speed are strictly required.
The SPDSI13 adopts a modular design and is used in conjunction with dedicated terminal units. It supports quick plugging and unplugging as well as on-site maintenance, significantly enhancing the efficiency of engineering deployment and system availability.
Core features
16 independent digital input channels, high-density design saves cabinet space
Supports dry contact or wet node signal input, and is compatible with 24VDC or 120/230VAC input
Electrical isolation: Each input channel is electrically isolated from the system bus, providing strong anti-interference capability
Fast response time: < 2 ms (typical value), meeting the requirements of high-speed control
Clear status indication: The panel is equipped with dual groups of leds (each group has 8 channels), which can display the input status in real time
Plug-and-play design: With a dedicated terminal base, it supports hot-swapping of modules (system support required)
DIN rail mounting, compatible with standard control cabinet layout
Powered by the I/O bus, no additional external power supply is required
Seamlessly integrated into Freelance DCS and other compatible control systems
Technical parameters
Model: SPDSI13
Product Name: 16-Channel Digital Input Module
System to which: ABB S800 I/O series
Type: Digital Input Module (DI
Number of input channels: 16
Input signal type:
Dry contact (passive
Wet node (active) : 24 VDC or 120/230 VAC
Input voltage range
For 24 VDC input: Rated 24 VDC, operating range 10.8 to 30 VDC
For 120/230 VAC input: Rated 120/230 VAC, operating range 79.2 to 264 VAC
Input current: Maximum 2 mA (@24 VDC)
Response time: < 2 ms (typical value)
Electrical isolation: The channel is isolated from the backplane bus (test voltage ≥ 500 VAC)
Status indication: 2 groups of leds (8 channels per group)
Power supply mode: Powered by I/O bus (via ModuleBus)
Communication interface: ModuleBus (connected to the Freelance controller)
Installation method: DIN EN 60715 standard rail
Dimensions (width × height × depth) : approximately 45 × 135 × 90 mm
Weight: Approximately 300 g
Operating temperature: 0°C to +60°C
Storage temperature: -40°C to +85°C
Protection grade: IP20 (For use within the control cabinet only)
Typical applications
Collect digital signals from on-site switches, buttons, limit switches, relay contacts, etc
Motor start-stop status monitoring, valve position feedback, and safety interlock signal input
Integrate with DCS or PLC systems to build highly reliable process control loops
It is applicable to automated production lines or energy management systems that require a large amount of discrete quantity collection
Product Images
Related Products
| SPFEC01 | SPFEC02 |
| SPFEC03 | SPFEC04 |
| SPFEC05 | SPFEC06 |
| SPFEC07 | SPFEC08 |
| SPFEC09 | SPFEC10 |
| SPFEC11 | SPFEC12 |
| SPFEC13 | SPFEC14 |
| SPFEC15 | SPFEC16 |
| SPFEC17 | SPFEC18 |
| SPFEC19 | SPFEC20 |
|
|
SPDSI13 ABB Digital input module High densityhigh reliability compatibility multiple control systems Images
|
